Copper bonded grounding rod is made from low carbon steel with a high tensile strength of at
least 600 N/mm2. Low carbon steel core are molecularly tended with 99.9% pure electrolytic
Features of Yash Copper Bonded Pipe rod
Perfectly bonded Copper bonded grounding rod will lost longer, drive
easier and will not crack.
-> In Copper Copper bonded grounding rod, Copper purity is 99.95%
-> The Copper bonded grounding rod is fully covered with copper cladding
without any cracks, holes, cavities etc.
-> Threads are rolled by roll threading process, which ensures that when
copper covers is maintained, at the root of the thread, Roll thread
gives greater strength than cut thread.
-> Thread rolling process raises the surface of the rod so that Thread
dia. (T) is greater than (S)
-> Magnetic conducting rate is low. Thus reducing the lightning
Good tensile strength in Copper bonded grounding rod, over 600N/mm2.
• Resist corrosion better than galvanized rods allowing for a 30-year
service life in most soils
• Corrosion resistance while providing the lowest resistance to ground.
Preventing exposure of the steel core to soil and moisture. The Threaded
copper clad rod is suitably treated to prevent oxidation of copper
• The Copper bonded grounding rod is capable of being bent 90 degrees at a
maximum radius of 100mm with no copper fracture and with no ill effect on
the bond between the steel and the copper cladding.
• Copper layer is over 0.254mm (copper layer thickness can be on request,
such as 0.10mm, 0.25mm, 0.100mm, 0.150mm, 0.200mm, 0.254mm etc. upto